Roofing Machine For Sale

Roofing Machine For Sale

The roofing machine for sale is a commonly used construction equipment, mainly used to process metal materials and produce profiled panels of various shapes. In the construction industry, profiled panels are widely used as roof and wall covering materials.

Roofing Machine For Sale

Specification

Operation

1. Tile press

1). Check whether the parts of the tile press are intact and whether there are any looseness or other abnormalities;

2). Prepare the tiles to be pressed and the tools needed for the tile press;

3). Provide safety training to operators so that they can understand relevant safety knowledge and understand the structure, performance and operating procedures of the machine.

2. Debugging the machine

1). Adjust the tool

Tool adjustment is an important link to ensure the tile forming effect. The operator needs to adjust according to the thickness and geometric parameters of the tile to ensure that parameters such as tool height and deviation angle meet the requirements.

2). Adjust the feeding device

The adjustment of the feeding device is as important as the adjustment of the tool. It is necessary to ensure that the feeding state is stable, the feeding transmission part is not loose, and the feeding height can meet the production requirements.

3). Check the oil circuit

Check whether the oil circuit of the hydraulic system is smooth and whether there is leakage, which needs to be repaired in time.

3. Adjust pressure

1). Adjust the pressure value

The pressure value of the tile press needs to be adjusted according to different tile materials and design parameters. Generally, the pressure range of the tile press ranges from 100-200t. Operators need to adjust according to production requirements.

2). Adjust the pressure holding time

The pressure holding time is adjusted to ensure the quality of the tiles after they are formed. The time is generally 1-5 seconds. Holding time that is too long will result in reduced output, and holding time that is too short will result in low quality finished products.

4. Disembarkation operation

1). Arrange your disembarkation time reasonably

During the production process, the unloading time should be reasonably arranged to avoid being unable to unload the machine in time after the tiles are formed, which will affect production efficiency.

2). Clean the equipment properly

Properly cleaning the equipment and maintaining good equipment condition is also a link that operators need to pay attention to. During the cleaning process, a vacuum cleaner should be used to remove residual materials, dust and debris.